Panasonic KX-MB1500 Operating Instructions - Page 59
Report messages KX-MB1520 only
View all Panasonic KX-MB1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
11. Help 11.1 Report messages (KX-MB1520 only) To indicate the unit's fax transmission/reception status, one of the following messages will be printed on the 11. . Help confirmation and journal reports (page 34). Message COMMUNICATION ERROR ERROR-NOT YOUR UNIT JUNK FAX PROH. REJECT MEMORY FULL OTHER FAX NOT RESPONDING PRESSED THE 'Stop' KEY THE COVER WAS OPENED OK Code 40-42 46-72 FF 43 44 53 54 59 70 --------- ----- Cause & Solution R A transmission or reception error occurred. Try again or check with the other party. R A line problem occurred. Connect the telephone line cord to a different jack and try again. R An overseas transmission error occurred. Try using the overseas mode (feature #411 on page 50). R A transmission or reception error occurred because of a problem with the other party's fax machine. Check with the other party. R The junk fax prohibitor feature of this unit rejected fax reception. R The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load paper (page 13) or remove the jammed paper (page 68). R If the PC fax setting (feature #442 on page 53) is set to "ALWAYS", check the connection between the computer and the unit. R The other party's fax machine is busy or has run out of recording paper. Try again. R The other party's fax machine rings too many times. Send the fax manually (page 34). R The other party's machine is not a fax machine. Check with the other party. R The number you dialed is not in service. R MStopN was pressed and fax communication was canceled. R The front cover was opened. Close it and try again. R Fax transmission or reception was successful. For assistance, please visit http://www.panasonic.com/help 59