Panasonic PT-DZ21KU Operating Instructions - Page 107
English - 107, Lamp Select]
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
10) Press ◀▶ to switch [COMMAND]. zzThe setting will change as follows each time you press the button. [POWER ON] [STANDBY] [SHUTTER]*1 [P IN P]*1 [LAMP SELECT]*1 [INPUT]*1 *1: Displays the details set in Step 12). 11) Press the button. zzThe [COMMAND] detailed setting screen is displayed. 12) Press ▲▼ to select a command. zzFor [SHUTTER], [INPUT], [LAMP SELECT], and [P IN P], the setting will change as follows each time you press the button. zz[SHUTTER] [OPEN] zz[INPUT] [RGB1] [RGB2] [CLOSE] [VIDEO] [SDI2]*1 [DVI-D] [SDI1]*1 *1: PT-DZ21KU and PT-DS20KU only zz[LAMP SELECT] [SINGLE] [HDMI] [DUAL] [QUAD] zz[P IN P] [OFF] [TRIPLE] [USER1] [USER3] [USER2] 13) Press the button. zzThe command is fixed and ● is displayed at the left of the selected command. zzAfter the command is fixed, press the button to close the detailed setting menu. 14) Press ▲▼ to select [STORE], and press the button. [PROJECTOR SETUP] menu Note zzIf you try to register a setting that would cause the lamp to flash for a short time, an error message will be displayed on the screen. Set the time and command again. zzTo delete a command already set, press the button on the Step 6) screen, or select [DELETE] on the Step 7) screen and press the button. zzIf multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command number. zzThe operating time will be the local time. ( page 110) zzIf an operation is executed with the remote control or control panel of the projector or with a control command before the command set in [SCHEDULE] is executed, the command set with this function may not be executed. Settings ENGLISH - 107