Panasonic PT-DZ21KU Operating Instructions - Page 26
Connecting terminals, For PT-DZ21KU, PT-DS20KU - hd
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Preparation About your projector ■■Connecting terminals zzFor PT-DZ21KU, PT-DS20KU (1) (2) (3) (4) (5) (6) zzFor PT-DW17KU (1) (2) (7) (3) (4) (8) (9) (10) (11) (12) (6) (7) (1) terminal / terminal These are the terminals to connect the remote control for serial control when the system uses multiple projectors. (2) terminal This is a terminal to remotely control the projector using the external control circuit. (3) terminal This is a RS-232C compatible terminal to externally control the projector by connecting a computer. (4) terminal This is a terminal to output the signal connected to the serial input terminal. (5) terminal / terminal This is a terminal to input the SDI signal. (Only for PT-DZ21KU, PT-DS20KU) (6) terminal This is a terminal to input the HDMI signal. (8) (9) (10) (12) (7) (, , , , ) terminal This is a terminal to input RGB signals or the YCBCR/ YPBPR and Y/C signals. (8) terminal This is a terminal to input RGB signals or YCBCR/YPBPR signals. (9) terminal This is a terminal to input DVI-D signals. (10) terminal This is a terminal to input video signals. (11) terminal / terminal This is a terminal to input or output control signals when using the projector in 3D systems. (Only for PT-DZ21KU, PT-DS20KU) (12) terminal This is a terminal to connect to the network. Used for control and monitoring. Image input through network connections is not possible. Attention zzWhen a LAN cable is directly connected to the projector, the network connection must be made indoors. 26 - ENGLISH