Panasonic PT-DZ21KU Operating Instructions - Page 84
[3d Input Format], [left/right Swap], [3d Color Matching], Press The <enter> Button.
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
[3D SETTINGS] menu (PT‑DZ21KU and PT‑DS20KU only) [3D INPUT FORMAT] Set the 3D format for the image signals being input. Set a 3D format that matches the input signal. 1) Press ▲▼ to select [3D INPUT FORMAT]. 2) Press the button. zzThe [3D INPUT FORMAT] screen is displayed. 3) Press ▲▼ to select a 3D format. 4) Press the button. [AUTO]*1 Automatically detects 3D format of input image signals and displays images. [NATIVE] Forcibly displays images in 2D regardless of input image signals. Forcibly displays 3D images in [SIMULTANEOUS]*2 simultaneous format regardless of input image signals. [SIDE BY SIDE] Forcibly displays 3D images in side by side format regardless of input image signals. [TOP AND BOTTOM] Forcibly displays 3D images in top and bottom format regardless of input image signals. [LINE BY LINE]*3 Forcibly displays 3D images in line by line format regardless of input image signals. [FRAME SEQUENTIAL]*4 Forcibly displays 3D images in frame sequential format regardless of input image signals. *1: During DVI-D or HDMI input only *2: During 3G-SDI level B input only *3: During signals other than interlaced signals are input *4: During RGB1, RGB2, DVI-D, and HDMI input only Note zzWhen set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL], images are not displayed in 3D as per the [3D SIMUL INPUT SETTING]. However, this only occurs in [AUTO] when 3D format can be recognized. zzThis may not function properly for some external devices that are connected. [LEFT/RIGHT SWAP] Flips the timing of the switch between the left and right of an image to display. Change the setting if the 3D images you see appear strange. 1) Press ▲▼ to select [LEFT/RIGHT SWAP]. 2) Press ◀▶ to switch [LEFT/RIGHT SWAP]. zzThe setting will change as follows each time you press the button. [NORMAL] [SWAPPED] [NORMAL] [SWAPPED] If the 3D images are displayed correctly, do not change the [NORMAL] settings. Select when left and right 3D images are swapped to be displayed. Note zzThis is disabled when [3D SYSTEM SETTING] is set to any setting other than [SINGLE]. [3D COLOR MATCHING] Switches the color matching correction data applied to the displayed image. 1) Press ▲▼ to select [3D COLOR MATCHING]. 2) Press ◀▶ to switch [3D COLOR MATCHING]. zzThe setting will change as follows each time you press the button. [SHARED 2D/3D] [SEPARATE 2D/3D] [SHARED 2D/3D] [SEPARATE 2D/3D] 2D signals and 3D signals use the same correction data. 2D signals and 3D signals use different correction data. Note zzKeep the signal you want to adjust input when you switch the [COLOR MATCHING] ( page 88) setting. Settings 84 - ENGLISH