Panasonic PT-DZ21KU Operating Instructions - Page 99
[projector Setup] Menu, [projector Id], [projection Method
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
[PROJECTOR SETUP] m[ePRnOuJECTOR SETUP] menu Select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to "Navigating through the menu" ( page 61) for the operation of the menu screen. zzAfter selecting the item, press to set. [PROJECTOR ID] The projector has an ID number setting function that can be used when multiple projectors are used side by side to enable simultaneous control or individual control via one remote control. 1) Press ▲▼ to select [PROJECTOR ID]. 2) Press ◀▶ to switch [PROJECTOR ID]. zzThe setting will change as follows each time you press the button. [ALL] [1] [64] [2] Note zzThe ID number can be set to a value from [ALL], [1] to [64]. zzTo specify an ID number for individual control, the ID number of a remote control must match the ID number of the projector. zzWhen the ID number is set to [ALL], the projector will operate regardless of the ID number specified during remote control or computer control. If multiple projectors are set up side by side with IDs set to [ALL], they cannot be controlled separately from the projectors with other ID numbers. zzRefer to "Setting Remote control ID numbers" ( page 27) regarding the method to set the ID number on the remote control. [PROJECTION METHOD] Set the projection method in accordance with the installation status of the projector. Change the projection method if the screen display is upside down or inverted. 1) Press ▲▼ to select [PROJECTION METHOD]. 2) Press the button. zzThe [PROJECTION METHOD] screen is displayed. 3) Press ▲▼ to select the projection method. [FRONT/FLOOR] When installing on the desk, etc., in front of the screen When installing using the [FRONT/CEILING] ceiling mount bracket (optional accessories) in front of the screen When installing on the desk, [REAR/FLOOR] etc., behind the screen (using a translucent screen) When installing using the [REAR/CEILING] ceiling mount bracket (optional accessories) behind the screen (using a translucent screen) 4) Press the button. 5) When the confirmation is displayed, select [OK] or [CANCEL], and press the button. Attention zzWhen [PROJECTION METHOD] is changed, confirm that [COOLING CONDITION] ( page 100) is set correctly. Settings ENGLISH - 99