Panasonic PT-DZ21KU Operating Instructions - Page 72
[position] Menu, [shift], [aspect]
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
[[PPOOSISTIOITNI]OmNen]u menu Select [POSITION] from the main menu, and select the item from the sub-menu. Refer to "Navigating through the menu" ( page 61) for the operation of the menu screen. zzAfter selecting the item, press to set. [SHIFT] You can move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relative position of the projector and the screen is installed correctly. 1) Press ▲▼ to select [SHIFT]. 2) Press the button. zzThe [SHIFT] screen is displayed. 3) Press to adjust the position. ■■For vertical (up and down) adjustment Operation Adjustment Press ▲ . The picture position moves up. Press ▼ . The picture position moves down. ■■For horizontal (right and left) adjustment Operation Adjustment [ASPECT] You can switch the aspect ratio of the image. The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first.( page 90) 1) Press ▲▼ to select [ASPECT]. 2) Press ◀▶ or the button. zzThe [ASPECT] individual adjustment screen is displayed. 3) Press ◀▶ to switch the [ASPECT]. zzThe setting will change as follows each time you press the button. [VID AUTO]*1 [DEFAULT] [AUTO]*2 [THROUGH] [HV FIT] [16:9] [V FIT] [H FIT] [4:3] *1: For video signals and Y/C signals (NTSC) only *2: For RGB (480i or 480p) signal input only ■■[DEFAULT] Pictures are displayed without changing the aspect ratio of the input signals. ■■[VID AUTO] The projector identifies the video ID (VID) embedded in the image signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is effective for NTSC signals. ■■[AUTO] The projector identifies the video ID (VID) embedded in the image signals and displays the image by automatically switching the screen sizes between 4:3 and 16:9. This function is effective for 480i/480p signals. ■■[THROUGH] Pictures are displayed without changing the resolution of the input signals. Press ▶ . The picture position moves to the right. Settings Press ◀ . The picture position moves to the left. 72 - ENGLISH