Panasonic PT-DZ21KU Operating Instructions - Page 80
[frame Response], [frame Lock] (pt‑dz21ku And Pt‑ds20ku Only), [raster Position], Pt-dz21ku
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
[ADVANCED MENU] [FRAME RESPONSE] Image processing is simplified when 1080/60i, 1080/50i, and 1080/24sF signals are input to reduce image frame delay. 1) Press ▲▼ to select [FRAME RESPONSE]. 2) Press ◀▶ to switch [FRAME RESPONSE]. zzThe setting will change as follows each time you press the button. [NORMAL] [FAST] [NORMAL] [FAST] Standard setting. Set when the picture is displayed later than sound. Note zzWhen [FRAME RESPONSE] is set to [FAST], picture quality deteriorates. Noise reduction, digital cinema quality and P IN P functions also cannot be used. zzWhen [NOISE REDUCTION] is set to other than [OFF], [FRAME RESPONSE] cannot be set. [FRAME LOCK] (PT‑DZ21KU and PT‑DS20KU only) Set this to view 3D display when the scanning frequency of the signal is 25 Hz, 50 Hz, and 100 Hz. 1) Press ▲▼ to select [FRAME LOCK]. 2) Press ◀▶ to switch [FRAME LOCK]. zzThe setting will change as follows each time you press the button. [OFF] [ON] [OFF] [ON] Decreases the flickering. Synchronizes the display to the scanning frequency of the input signal. Note zz[FRAME LOCK] is not displayed when the scanning frequency of the signal other than above is input or 2D images are displayed. zzThe screen may flicker when the [FRAME LOCK] is set to [ON]. zzThe display may look discontinuous when the [FRAME LOCK] is set to [OFF]. [RASTER POSITION] This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area. 1) Press ▲▼ to select [RASTER POSITION]. 2) Press the button. zzThe [RASTER POSITION] screen is displayed. 3) Press to adjust the position. Settings 80 - ENGLISH