Panasonic PT-DZ21KU Operating Instructions - Page 47
Connecting example: Computers, ENGLISH - 47
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Getting Started Connecting example: Computers The following diagram is a connecting example for PT-DZ21KU and PT-DS20KU. Connecting &RPSXWHUIRUFRQWURO &RPSXWHU &RPSXWHU &RPSXWHU &RPSXWHU Note zzThe terminal supports single links only. zzFor signals that the projector can project, refer to "List of compatible signals" ( page 167). zzIf you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate the projector. zzWhen entering the SYNC ON GREEN signal, do not enter sync signals to the terminal or the terminal. zzWhen entering DVI-D, some external devices to be connected require EDID to be set. ( page 92) zzUse an HDMI cable that conforms to HDMI standards such as an HDMI High Speed cable. If a cable that does not meet HDMI standards is used, video may be interrupted or may not be displayed. zzThe terminal of the projector can be connected to an external device with an DVI-D terminal by using a HDMI/DVI conversion cable, but some devices may not project the image properly or function properly. Caution When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables. ENGLISH - 47