Panasonic PT-DZ21KU Operating Instructions - Page 96
[shutter Setting], [freeze], [waveform Monitor], To Set [pc Correction]
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
[DISPLAY OPTION] menu ■■To set [PC CORRECTION] To use the [PC CORRECTION] function, an optional upgrade kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer. 4) Select [PC CORRECTION] in Step 3). 5) Press ◀▶ to switch. zzThe setting will change as follows each time you press the button. [ON] [OFF] [ON]*1 Use a computer to correct the brightness and color unevenness of the entire screen. [OFF] A computer cannot be used to correct. *1: Advanced skills are necessary to use computer controls to correct. Consult your dealer. Note zz[UNIFORMITY] can be set for each [LAMP SELECT] setting. zzThe setting value for [UNIFORMITY] will not return to the factory default value even if [INITIALIZE] is executed. [SHUTTER SETTING] Set image fade-in and fade-out at opening and closing of the shutter. Set automatic opening and closing of the shutter when power is turned on and off. 1) Press ▲▼ to select [SHUTTER SETTING]. 2) Press the button. zzThe [SHUTTER SETTING] screen is displayed. 3) Press ▲▼ to select an item. ■■To set [FADE-IN] or [FADE-OUT] 4) Select [FADE-IN] or [FADE-OUT] in Step 3). 5) Press ◀▶ to switch. zzThe setting can be set to [OFF], or to a value from [0.5 s] to [4.0 s]. Note zzPress the button on the remote control or the control panel during fade-in or fadeout to cancel the fade operation. ■■Setting [STARTUP] 4) Select [STARTUP] in Step 3). 5) Press ◀▶ to switch. zzThe setting will change as follows each time you press the button. [OPEN] [CLOSE] [OPEN] [CLOSE] Projection begins when the shutter is open and the power is turned on. Projection begins when the shutter is closed and the power is turned on. ■■To set [SHUT-OFF] 4) Select [SHUT-OFF] in Step 3). 5) Press ◀▶ to switch. zzThe setting will change as follows each time you press the button. [OPEN] [CLOSE] [KEEP CURRENT STATE] [OPEN] [CLOSE] [KEEP CURRENT STATE] Enters standby when the shutter is open and the power is turned off. Enters standby when the shutter is closed and the power is turned off. Maintains the current shutter status and enters standby when the power is turned off. [FREEZE] The projected image is paused temporarily regardless of the playback of the external equipment. 1) Press ▲▼ to select [FREEZE]. 2) Press the button. zzPress the button to release. [WAVEFORM MONITOR] Use the input signals from a connected external device to display in a waveform. Check whether image output (luminance) signal level is within the recommended range for the projector and adjust. 1) Press ▲▼ to select [WAVEFORM MONITOR]. Settings 96 - ENGLISH