Panasonic PT-DZ21KU Operating Instructions - Page 83

[3d Simul Input Setting], English - 83

Get Panasonic PT-DZ21KU PDF manuals and user guides View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

[3D SETTINGS] menu (PT‑DZ21KU and PT‑DS20KU only) zzItems set in [3D SYNC2] [OFF] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] Not used. Stereo synch output 3D trigger output Through 3D SYNC1 Stereo synch output 3D trigger output Through 3D SYNC1 Stereo synch output 3D trigger output Frame synch output Frame synch output 3D IR TRANSMITTER (-) output 6) If you selected [1], [4], [7], or [10], press ▲▼ to select [STEREO SYNC OUTPUT DELAY] and press ◀▶ to set the amount of delay output. zzValues in the following range change by units of 10 us. 0 us to 25 000 us zzTo synchronize multiple projectors to display 3D images, use a frame synch input and output. Select [9] or [10] for the first projector. Select [6], [7], or [8] for the second and subsequent projectors. zzStereo synch is a Duty 50% signal at High during Left and at Low during Right. zzAn "H" is output to the 3D images display and an "L" is output to the 2D image display from the terminal for which 3D trigger output is selected. Note zz[11] of [3D SYNC SETTING] is the setting when the 3D IR Transmitter TY-3DTRW (Panasonic) is used with this projector. As for connecting method, consult your dealer. [3D SIMUL INPUT SETTING] Set to input and use simultaneous 3D images signals. 1) Press ▲▼ to select [3D SIMUL INPUT SETTING]. 2) Press the button. zzThe [3D SIMUL INPUT SETTING] screen is displayed. 3) Press ▲▼ to select [LEFT:RGB1 RIGHT:RGB2], [LEFT:HDMI RIGHT:DVI-D], or [LEFT:SDI1 RIGHT:SDI2]. 4) Press ◀▶ to switch the setting. zzThe setting will change as follows each time you press the button. [OFF] [AUTO] [OFF] [AUTO] Cannot use 3D simultaneous. Displays simultaneous 3D images. Note zzWhen set to [AUTO], 3D images are displayed when the same 3D compatible signals are entered to each input. However, the P IN P status during P IN P is maintained. zzThis may not function properly for some external devices that are connected. zzCertain signals may not function properly. Settings ENGLISH - 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
[3D SETTINGS] menu (PT-DZ21KU and PT-DS20KU only)
ENGLISH - 83
Settings
▶
z
Items set in [3D SYNC2]
[OFF]
Not used.
[1]
Stereo synch output
[2]
3D trigger output
[3]
Through 3D SYNC1
[4]
Stereo synch output
[5]
3D trigger output
[6]
Through 3D SYNC1
[7]
Stereo synch output
[8]
3D trigger output
[9]
Frame synch output
[10]
Frame synch output
[11]
3D IR TRANSMITTER (–) output
6) If you selected [1], [4], [7], or [10],
press
▲▼
to select [STEREO SYNC
OUTPUT DELAY] and press
◀±
to set
the amount of delay output.
▶
z
Values in the following range change by units of
10 us.
0 us to 25 000 us
▶
z
To synchronize multiple projectors to display 3D
images, use a frame synch input and output.
Select [9] or [10] for the first projector.
Select [6], [7], or [8] for the second and
subsequent projectors.
▶
z
Stereo synch is a Duty 50% signal at High
during Left and at Low during Right.
▶
z
An “H” is output to the 3D images display and
an “L” is output to the 2D image display from
the terminal for which 3D trigger output is
selected.
Note
z
[11] of [3D SYNC SETTING] is the setting when
the 3D IR Transmitter TY-3DTRW (Panasonic) is
used with this projector. As for connecting method,
consult your dealer.
[3D SIMUL INPUT SETTING]
Set to input and use simultaneous 3D images signals.
1) Press
▲▼
to select [3D SIMUL INPUT
SETTING].
2) Press the <ENTER> button.
▶
z
The
[3D SIMUL INPUT SETTING]
screen is
displayed.
3) Press
▲▼
to select [LEFT:RGB1
RIGHT:RGB2], [LEFT:HDMI
RIGHT:DVI-D], or [LEFT:SDI1
RIGHT:SDI2].
4) Press
◀±
to switch the setting.
▶
z
The setting will change as follows each time
you press the button.
[OFF]
[AUTO]
[OFF]
Cannot use 3D simultaneous.
[AUTO]
Displays simultaneous 3D images.
Note
z
When set to [AUTO], 3D images are displayed
when the same 3D compatible signals are entered
to each input. However, the P IN P status during P
IN P is maintained.
z
This may not function properly for some external
devices that are connected.
z
Certain signals may not function properly.