Panasonic PT-DZ21KU Operating Instructions - Page 77

[advanced Menu], [digital Cinema Reality], [blanking]

Page 77 highlights

[ADVANCED MENU] [ADVANCED MENU] Select [ADVANCED MENU] from the main menu, and select the item from the sub-menu. Refer to "Navigating through the menu" ( page 61) for the operation of the menu screen. zzAfter selecting the item, press to set. [DIGITAL CINEMA REALITY] You can increase the vertical resolution and enhance the picture quality by performing the cinema processing when the PAL (or the SECAM) 576i signal, the NTSC 480i, 1080/50i, and 1080/60i signals are input. 1) Press ▲▼ to select [DIGITAL CINEMA REALITY]. 2) Press ◀▶ to switch [DIGITAL CINEMA REALITY]. zzThe setting will change as follows each time you press the button. [AUTO] [OFF] [25p FIXED] (when a 576i or 1080/50i signal is input) [30p FIXED] (when a 480i or 1080/60i signal is input) [AUTO] [OFF] [25p FIXED] [30p FIXED] Performs automatic detection and cinema processing. (Factory default) Unforced cinema processing. Forced cinema processing (2:2 pulldown) is performed when a 576i or 1080/50i signal is input. Forced cinema processing (2:2 pulldown) is performed when a 480i or 1080/60i signal is input. Note zzIn [DIGITAL CINEMA REALITY] mode, the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p FIXED]. (Vertical resolution will degrade.) [BLANKING] The blanking width is adjusted when there are noise at the edge of the screen or the image is slightly running out from the screen when an image from the VCR or other devices are projected. 1) Press ▲▼ to select [BLANKING]. 2) Press the button. zzThe [BLANKING] adjustment screen is displayed. 3) Press ▲▼ to select the adjustment item. 4) Press ◀▶ to adjust the blanking. zzChanges within the following range. For PT-DZ21KU Left to right: 0 to 959, Top to bottom: 0 to 599 For PT-DS20KU Left to right: 0 to 699, Top to bottom: 0 to 524 For PT-DW17KU Left to right: 0 to 682, Top to bottom: 0 to 383 When correcting blanking at the top of the screen [UPPER] Press ◀ to move the blanking zone upward. Press ▶ to move the blanking zone downward. When correcting blanking at the bottom of the screen [LOWER] Press ▶ to move the blanking zone upward. Press ◀ to move the blanking zone downward. When correcting blanking at the left of the screen [LEFT] Press ▶ to move the blanking zone to the right. Press ◀ to move the blanking zone to the left. When correcting blanking at the right of the screen [RIGHT] Press ◀ to move the blanking zone to the right. Press ▶ to move the blanking zone to the left. For [CUSTOM MASKING]*1 Set from a PC to perform blanking in any shape. *1: To use the [CUSTOM MASKING] function, an optional upgrade kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer. Settings ENGLISH - 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179

ENGLISH - 77
Settings
Select [ADVANCED MENU] from the main
menu, and select the item from the sub-menu.
Refer to
Navigating through the menu
(
page 61) for the operation of the menu
screen.
z
After selecting the item, press
▲▼◀±
to set.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance
the picture quality by performing the cinema
processing when the PAL (or the SECAM) 576i signal,
the NTSC 480i, 1080/50i, and 1080/60i signals are
input.
1) Press
▲▼
to select [DIGITAL CINEMA
REALITY].
2) Press
◀±
to switch [DIGITAL CINEMA
REALITY].
z
The setting will change as follows each time
you press the button.
[AUTO]
[OFF]
[25p FIXED] (when a 576i or 1080/50i signal is input)
[30p FIXED] (when a 480i or 1080/60i signal is input)
[AUTO]
Performs automatic detection and
cinema processing.
(Factory default)
[OFF]
Unforced cinema processing.
[25p FIXED]
Forced cinema processing (2:2
pulldown) is performed when a 576i
or 1080/50i signal is input.
[30p FIXED]
Forced cinema processing (2:2
pulldown) is performed when a 480i
or 1080/60i signal is input.
Note
z
In [DIGITAL CINEMA REALITY] mode, the picture
quality will degrade when a signal other than the
2:2 pulldown is set as [25p FIXED] or [30p FIXED].
(Vertical resolution will degrade.)
[BLANKING]
The blanking width is adjusted when there are noise
at the edge of the screen or the image is slightly
running out from the screen when an image from the
VCR or other devices are projected.
1) Press
▲▼
to select [BLANKING].
2) Press the <ENTER> button.
z
The
[BLANKING]
adjustment screen is
displayed.
3) Press
▲▼
to select the adjustment
item.
4) Press
◀±
to adjust the blanking.
z
Changes within the following range.
For PT-DZ21KU
Left to right: 0 to 959, Top to bottom: 0 to 599
For PT-DS20KU
Left to right: 0 to 699, Top to bottom: 0 to 524
For PT-DW17KU
Left to right: 0 to 682, Top to bottom: 0 to 383
When correcting blanking at the top of the screen [UPPER]
Press
to move the
blanking zone upward.
Press
±
to move the
blanking zone downward.
When correcting blanking at the bottom of the screen [LOWER]
Press
±
to move the
blanking zone upward.
Press
to move the
blanking zone downward.
When correcting blanking at the left of the screen [LEFT]
Press
±
to move the
blanking zone to the right.
Press
to move the
blanking zone to the left.
When correcting blanking at the right of the screen [RIGHT]
Press
to move the
blanking zone to the right.
Press
±
to move the
blanking zone to the left.
For [CUSTOM MASKING]
*1
Set from a PC to perform blanking in any shape.
*1:
To use the [CUSTOM MASKING] function, an optional
upgrade kit (Model No.: ET-UK20) is required. To purchase
the product, consult your dealer.
[ADVANCED MENU]