Panasonic PT-DZ21KU Operating Instructions - Page 89
[large Screen Correction], English - 89
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
[DISPLAY OPTION] menu ■■To use a colorimeter to adjust the color matching Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE] to desired colors. zzInputting the current luminance and chromaticity coordinates 1) Press ▲▼ to select [COLOR MATCHING]. 2) Press ◀▶ to select [709MODE] or [MEASURED]. 3) Press the button. zzThe [709MODE] or [MEASURED MODE] screen is displayed. 4) Press ▲▼ to select [MEASURED DATA]. 5) Press the button. zzThe [MEASURED DATA] screen is displayed. 6) Measure the luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter. 7) Press ▲▼ to select a color, and press ◀▶ to adjust the setting. zzSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors. 8) Once all the input is completed, press the button. zzThe [709MODE] or [MEASURED MODE] screen is displayed. zzInputting the coordinates of desired colors (for [MEASURED] only) 9) Press ▲▼ to select [TARGET DATA]. 10) Press the button. zzThe [TARGET DATA] screen is displayed. 11) Press ▲▼ to select a color and press ◀▶ to input coordinates for desired colors. zzSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors. 12) Once all the input is completed, press the button. Note zzWhen [709MODE] is selected in [COLOR MATCHING], the ITU-R BT.709 standard three primary colors are set as target data. zzColors are not displayed properly when target data is a color outside the region of this projector. zzThe [709MODE] may differ slightly from the ITU-R BT.709 standard colors. zzSet the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors. zzBefore using a colorimeter or similar instrument to measure measurement data, set [PICTURE MODE] to [DYNAMIC]. zzA difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments and measurement environments used. zzThe [AUTO TESTPATTERN] setting s change in conjunction with the [AUTO TESTPATTERN] settings in [EDGE BLENDING]. [LARGE SCREEN CORRECTION] Corrects the phenomenon in which colors that appear lighter when viewed on a large screen viewed from a close distance compared to when viewed on an average screen size so that colors appear the same. 1) Press ▲▼ to select [LARGE SCREEN CORRECTION]. 2) Press ◀▶ to switch [LARGE SCREEN CORRECTION]. zzThe setting will change as follows each time you press the button. [OFF] (No correction) [1] (Low) [2] (High) Settings ENGLISH - 89