Panasonic PT-DZ21KU Operating Instructions - Page 74
[clock Phase], [geometry] (pt‑dz21ku And Pt‑ds20ku Only), Keystone]
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
[POSITION] menu [CLOCK PHASE] You can adjust to achieve an optimal image when there is a flickering image or smeared outlines. 1) Press ▲▼ to select [CLOCK PHASE]. 2) Press ◀▶ or the button. zzThe [CLOCK PHASE] individual adjustment screen is displayed. 3) Press ◀▶ to adjust the level. zzAdjustment value will change between [0] and [31]. Adjust so that the amount of interference is at a minimum. Note zzCertain signals may not be adjustable. zzOptimal value may not be achieved if the output from the input computer is unstable. zzOptimal value may not be achieved when there is a shift in the total dot numbers. zz[CLOCK PHASE] can be adjusted only when a signal is input to the terminal or the terminal. zz[CLOCK PHASE] cannot be adjusted when a digital signal is input. zzIf you press ▶ while the adjustment value is [31], the value will become [0]. If you press ◀ while the adjustment value is [0], the value will become [31]. [GEOMETRY] (PT‑DZ21KU and PT‑DS20KU only) Correct various types of distortion in a projected image. Unique image processing technology enables projection of a square image on a special screen shape. 1) Press ▲▼ to select [GEOMETRY]. 2) Press ◀▶ to switch the [GEOMETRY] setting. zzThe setting will change as follows each time you press the button. [OFF] [KEYSTONE] [PC] [CURVED] [OFF] Does not perform geometric adjustment. [KEYSTONE] Adjusts any trapezoidal distortion in the projected image. [CURVED] Adjusts any curved distortion in the projected image. [PC]*1 Uses the computer to perform geometric adjustment. *1: Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. 3) Select [KEYSTONE] or [CURVED] in Step 2), and press the button. zzThe [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED] screen is displayed. 4) Press ▲▼ to select the item you want to adjust, and press ◀▶ to adjust the correction amount. zzThe projected image can be corrected. ■■[KEYSTONE] zz[LENS THROW RATIO] Set the throw ratio for the lens used. zz[VERTICAL KEYSTONE] Settings 74 - ENGLISH