Panasonic PT-DZ21KU Operating Instructions - Page 16
terminals surface facing down, Cautions when setting up the projector
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Important Information Precautions for use ■■Do not use the projector tilted to the right or left Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction. ■■When installing and using the projector at an angle that exceeds 30° vertically, set [COOLING CONDITION] ( page 100). Failure to observe this will result in malfunctions or shorten the life of the lamp or other components. ■■When a replacement lamp unit is used (for portrait mode), install it with the terminals surface facing down Do not use the projector tilted to the right and left, front and back. Using the projector at an angle that exceeds 15° in either direction may reduce product life or result in malfunction. ■■Cautions when setting up the projector zzWhen installing and using the projector with a method other than the floor standing installation using the adjustable feet, fix the projector using the six screw holes for ceiling mounting (see the figure below). (Screw diameter: M6, tapping depth inside the set: 30 mm (1-3/16"), torque: 4 ± 0.5 N·m) Bottom view Unit: mm 110 145 (4-11/32") (5-23/32") Model No. of ceiling mount bracket: ET-PKD510H (for high ceilings) ET-PKD510S (for low ceilings) 48 (1-7/8") 298 (11-23/32") 548 (21-9/16") 110 110 (4-11/32") (4-11/32") 135.5 145 (5-11/32") (5-23/32") Screw holes for ceiling mount M6 30 mm (1-3/16") Max. screw hole depth 25 mm (31/32") Screw hole depth M6 Space 30 mm (1-3/16") 12 mm (15/32") 12 mm (15/32") Max. screw hole depth Torque: 4 ± 0.5 N·m Embedded nut (Screw hole depth) 16 - ENGLISH