Panasonic PT-DZ21KU Operating Instructions - Page 70
[system Selector], <g/y>/<b/p
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
[PICTURE] menu [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal. 1) Press ▲▼ to select [SYSTEM SELECTOR]. 2) Press the button. 3) Press ▲▼ to select a system format. 4) Press the button. ■■When using terminal, / terminals Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60]. Attention zzSet it to [AUTO] normally. zzSwitch the setting to the signal method for the TV used. Note zzSetting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60]. ■■When using terminal, terminal zzOnly during 480i, 576i, or 576p signal input Select [RGB] or [YCBCR]. zzOnly during VGA60 or 480p signal input Select [VGA60], [480p YCBCR], or [480p RGB]. zzWhen using other movie based input signals Select [RGB] or [YPBPR]. Note zzRefer to "List of compatible signals" ( page 167) for compatible signals. ■■When using terminal zzOnly during 480p or 576p signal input Select [RGB] or [YCBCR]. zzWhen using other movie based input signals Select [RGB] or [YPBPR]. Note zzRefer to List of compatible signals ( page 167) for compatible signals. zzThis may not function properly for some external devices that are connected. ■■When using the terminal zzOnly during 480p or 576p signal input Select [AUTO], [RGB], or [YCBCR]. zzWhen using other movie based input signals Select [AUTO], [RGB], or [YPBPR]. Note zzRefer to List of compatible signals ( page 167) for compatible signals. zzThis may not function properly for some external devices that are connected. Settings 70 - ENGLISH