Panasonic PT-DZ21KU Operating Instructions - Page 93
[hdmi In], [sdi In] (pt‑dz21ku And Pt‑ds20ku Only), English - 93
View all Panasonic PT-DZ21KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
[DISPLAY OPTION] menu [HDMI IN] Switch the setting when the projector is connected to an external device via an HDMI cable and the image is not projected correctly. 1) Press ▲▼ to select [HDMI IN]. 2) Press the button. zzThe [HDMI IN] screen is displayed. 3) Press ◀▶ to switch [HDMI SIGNAL LEVEL]. zzThe setting will change as follows each time you press the button. [0-1023] [64-940] [0-1023] [64-940] Select when the DVI-D terminal output of an external device (such as a computer) is connected to the terminal via a conversion cable or similar cable. Select also when the HDMI terminal output of a computer or other device is connected to the terminal. Select when the HDMI terminal of an external device (such as a bluray disc player) is connected to the terminal. Note zzThe optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of the external equipment regarding the output of the external equipment. zzThe HDMI signal level is displayed per each 30 bits of input. [SDI IN] (PT‑DZ21KU and PT‑DS20KU only) Set to match the signal to input to the / terminal. 1) Press ▲▼ to select [SDI IN]. 2) Press the button. zzThe [SDI IN] screen is displayed. 3) Press ▲▼ to select an item. ■■To set [SDI LINK] 4) Select [SDI LINK] in Step 3). 5) Press ◀▶ to switch [SDI LINK]. zzThe setting will change as follows each time you press the button. [SINGLE LINK] [DUAL LINK] [SINGLE Set SDI1 input and SDI2 input to LINK] single link. [DUAL LINK] Set SDI1 input and SDI2 input to dual link. ■■To set [SDI SIGNAL LEVEL] Select the amplitude of the signal to input. 4) Select [SDI SIGNAL LEVEL] in Step 3). 5) Press ◀▶ to switch [SDI SIGNAL LEVEL]. zzThe setting will change as follows each time you press the button. [64-940] [4-1019] [64-940] [4-1019] Normally use this setting. Select when gray is displayed as black. Settings ENGLISH - 93