Pioneer VSX-1018AH-K Owner's Manual - Page 97
Additional information, Specifications
View all Pioneer VSX-1018AH-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Additional information 13 Specifications Amplifier section Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.09 %** total harmonic distortion (front). Continuous Power Output (20 Hz to 20 kHz, 8 Ω, 0.09 %) Front 110 W + 110 W Center 110 W Surround 110 W + 110 W Surround back 110 W + 110 W Continuous Power Output (1 kHz, 6 Ω, 1.0 %) Front 150 W + 150 W Center 150 W Surround 150 W + 150 W Surround back 150 W + 150 W Related Power Output (1 kHz, 8 Ω, 0.05 %) Front 130 W per channel Center 130 W Surround 130 W per channel Total harmonic distortion 0.09 % (20 Hz to 20 kHz, 110 W, 8 Ω) * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers ** Measured by Audio Spectrum Analyzer Audio Section Input (Sensitivity/Impedance) LINE 335 mV/47 kΩ Frequency Response (LINE 5 Hz to 100 000 Hz dB Output (Level/Impedance) REC 335 mV/2.2 kΩ Tone Control BASS 6 dB (100 Hz) TREBLE 6 dB (10 kHz) LOUDNESS 4 dB/+2 dB (100 Hz/10 kHz) (at volume position -40 dB) Signal-to-Noise Ratio (IHF, short circuited, A network) LINE 103 dB Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)] LINE 83 dB Component Video Section Input (Sensitivity/Impedance 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB Frequency Response 5 Hz to 100 MHz HDMI Section Input 19-pin x 3 Output 19-pin (5 V, 100 mA) FM Tuner Section Frequency Range 87.5 MHz to 108 MHz Usable Sensitivity Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf) Distortion Stereo: 0.5 % (1 kHz) Alternate Channel Selectivity 60 dB (400 kHz) Stereo Separation 40 dB (1 kHz) Frequency Response 30 Hz to 15 kHz ±1 dB Antenna Input 75 Ω unbalanced AM Tuner Section Frequency Range 530 kHz to 1 700 kHz Sensitivity (IHF, Loop antenna 350 µV/m Selectivity 25 dB Signal-to-Noise Ratio 50 dB Antenna Loop antenna Miscellaneous Power Requirements AC 120 V, 60 Hz Power Consumption 390 W In standby 0.6 W (HDMI Control OFF) 0.75 W (HDMI Control ON) Dimensions 420 (W) mm x 173 (H) mm x 433 (D) mm (16 9/16 (W) in. x 6 13/16 (H) in. x 17 1/16 (D) in.) Weight (without package 13.3 kg (29 lbs 6 oz) Furnished Parts Setup microphone (for Auto MCACC setup 1 AA/IEC R6P dry cell batteries 2 Remote control unit 1 AM loop antenna 1 FM wire antenna 1 Warranty card 1 These operating instructions Composite Video Section Input (Sensitivity/Impedance 1 Vp-p/75 Ω Output (Level/Impedance 1 Vp-p/75 Ω Signal-to-Noise Ratio 65 dB Frequency Response 5 Hz to 10 MHz Note • Specifications and the design are subject to possible modifications without notice, due to improvements. 97 En