Ricoh Aficio SP C232DN Operating Instructions - Page 223
Host Interface Menu Parameters, USB Timeout, Network Timeout, Network Setup
View all Ricoh Aficio SP C232DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Host Interface Menu Host Interface Menu Parameters This section explains parameters that can be set on the Host Interface menu. ❖ USB Timeout You can specify how many seconds the printer should wait before ending a print job that is receiving via USB. If printing is frequently interrupted by data from other ports, increase the timeout period. Default: 60 seconds • 15 seconds • 60 seconds • 300 seconds ❖ Network Timeout You can specify how many seconds the printer should wait before ending a print job that is receiving via Ethernet. If printing operation is frequently interrupted by data from other ports, you can increase the timeout period. Default: 60 seconds • 15 seconds • 60 seconds • 300 seconds ❖ Network Setup You can make network-related settings. • DHCP Select whether to set the IPv4 address automatically or manually. Default: On • On • Off Important ❒ After changing the setting, turn off the power of the printer briefly, and then turn it on again. • MAC Address Check the MAC address. • IP Address Specify the IPv4 address. When [DHCP] is set to [On], the IP address cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 192.0.0.192 • Subnet Mask Specify the subnet mask. When [DHCP] is set to [On], the subnet mask cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 255.255.255.0 5 59