Ricoh Aficio SP C232DN Operating Instructions - Page 224

USB Speed, Frame Type NW

Page 224 highlights

Making Printer Settings Using the Control Panel • Gateway Address Specify the gateway address. When [DHCP] is set to [On], the gateway address cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 192.0.0.192 • Frame Type (NW) Default: Auto Select • Auto Select • Ethernet ll • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP • Active Protocol 5 Select active protocols. • TCP/IP Default: Active Active, Not Active • NetWare Default: Active Active, Not Active • AppleTalk Default: Active Active, Not Active • Ethernet Speed Select the network speed to operate the printer. Default: Auto Select • Auto Select • 10Mbps Half D. • 10Mbps Full D. • 100Mbps Half D. • 100Mbps Full D. ❖ USB Speed You can make setting for USB Host interface. Default: Auto Select • Full Speed • Auto Select Important ❒ After changing the setting, turn off the power of the printer briefly, and then turn it on again. ❒ This function is only available for the SP C232DN model printer. 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288

Making Printer Settings Using the Control Panel
60
5
Gateway Address
Specify the gateway address.
When
[
DHCP
]
is set to
[
On
]
, the gateway address cannot be changed.
To change it, set
[
DHCP
]
to
[
Off
]
.
Contact your network administrator for information about the network
configuration.
Default: 192.0.0.192
Frame Type (NW)
Default: Auto Select
Auto Select
Ethernet ll
Ethernet 802.2
Ethernet 802.3
Ethernet SNAP
Active Protocol
Select active protocols.
• TCP/IP
Default: Active
Active, Not Active
• NetWare
Default: Active
Active, Not Active
• AppleTalk
Default: Active
Active, Not Active
Ethernet Speed
Select the network speed to operate the printer.
Default: Auto Select
Auto Select
10Mbps Half D.
10Mbps Full D.
100Mbps Half D.
100Mbps Full D.
USB Speed
You can make setting for USB Host interface.
Default: Auto Select
Full Speed
Auto Select
Important
After changing the setting, turn off the power of the printer briefly, and
then turn it on again.
This function is only available for the SP C232DN model printer.