Ricoh DD 6650P Operating Instructions - Page 126
Skip Feed
View all Ricoh DD 6650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4. Advanced Printing Skip Feed If the backs of prints are dirty, you can use the Skip Feed function to make the drum rotate twice instead of once with every sheet of paper fed. This gives you time to remove prints one by one from the paper delivery tray or to insert a sheet of paper between two prints. • The number of rotations can be set from 2 to 9. • The default is [2]. To change this setting, see page 149 "System Settings". As the paper feeding time is longer than usual, you can use paper longer than the length limitation. The maximum length of paper in Skip Feed mode is 460 mm (18.1 inches). When you use paper longer than 432 mm (17.0 inches), prints will not be delivered to the paper delivery tray properly, so lower the paper delivery end plate and take out the prints by hand. 1. Place the originals. 2. Press [Skip Feed]. 3. Press the [Start] key. To change the number of drum rotations In the step2, you can change the number of rotations temporarily. You can also have this step omitted by adjusting the User Tools settings. See page 149 "System Settings". 1. Select the number of drum rotations per sheet of paper fed with number keys. After printing is completed, the Skip Feed setting returns to the default. 2. Press [OK]. 124