Ricoh DD 6650P Operating Instructions - Page 155

User Tools Menu *3 (Over 29 °C or 84.2 °F) To increase the print image density, increase the number of drum rotations, and vice versa. Interface Settings For details about network settings, see "User Tools Menu (System Settings)", Network Guide. Administrator Tools Item User Code Management Key Operator Code Restricted Access Description You can select whether or not to use User Code mode. If user codes are turned on, users must enter their user codes before they can operate the machine. The machine keeps count of the number of copies made under each user code. User code must registered for User Code Management. For details, see page 162 "User Code". Default: [Off] You can specify whether or not to use key operator codes to control Administrator Tools settings for access codes. Default: [Off] If you select [On], enter the key operator code (max.4 digits) using the number keys, and then select [Partial] or [All Initial Settings] to set the access limit. • If you selected [Partial] A key operator code is only required to access Administrator Tools for System Settings. • If you selected [All Initial Settings] A key operator code is required to access all items in System Settings, Master Making/Print Settings, and Online Print Features. If you select [On], you must enter an access code to access the Key Operator Code display. In Key Counter mode, you have to set the key counter before making prints. (To turn on Key Counter mode, contact your service representative.) If Key Counter mode is on, Restricted Access is turned on automatically. If you turn Restricted Access off, you can make prints without inserting the key counter. Default: [Off] 153