Ricoh DD 6650P Operating Instructions - Page 41
Decrease print speed. See Changing the Printing Speed.
View all Ricoh DD 6650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Preparations for Printing Paper weight Paper sizes Paper alignment wings 128 g/m2 (34 lb.) or A3 , 11 × 17 , B4 Lower the wings. thicker JIS A4 , B5 JIS Lower the wings. 52.3 g/m2 - 128 g/m2 (13.9 lb. to 34 lb.) A3 , 11 × 17 , B4 JIS A4 , B5 JIS Raise the wings fully. Raise the wings to about 45 degrees. 52.3 g/m2 (13.9 lb.) A3 , 11 × 17 , B4 Raise the wings to or thinner JIS about 45 degrees. A4 , B5 JIS Raise the wings to about 45 degrees. Chocks Down Down Up Up Down Down • Depending on the type of paper you are using, you may not be able to load to capacity (1,000 sheets) when the wings are raised. • When printing on paper that is 52.3 g/m2 (13.9 lb.) or thinner at a fast speed, paper jams (C) may occur in the paper exit area. If this happens, do the following: • Decrease print speed. See page 73 "Changing the Printing Speed". • Lower the paper alignment wings. • Push the end plate toward the paper delivery tray edge. • If the paper alignment wings are raised, depending on the paper type, prints may not be delivered and neatly stacked. • When printing on A4 , 81/2 , B5 JIS shown below: size paper, swing out the trailing edge guides as ZDZY020E 39