Ricoh DD 6650P Operating Instructions - Page 178
When a Message is Displayed, See Replacing the Master Roll.
View all Ricoh DD 6650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
7. Troubleshooting When the supply/exchange indicators light up Indicator Message "Add paper." "Add Ink" "Add Master" "Master Eject Box is full." Reference See page 167 "Adding Paper". See page 171 "Adding Ink". See page 173 "Replacing the Master Roll". See page 186 "When the Master Eject Indicator Is Lit". When a Message is Displayed Message "Cannot detect original size." "Check the paper size and paper direction." "#### and paper size mismatch." Causes Solutions Original size is not detected correctly. When placing an original directly on the exposure glass, the lifting/lowering action of the exposure glass cover or ADF triggers the automatic original size detection process. Lift the exposure glass cover or ADF by 30 degrees or more. The paper is not placed in the same direction as the original. • Place the original in the same direction as the paper. • If you press the [Start] key, the selected paper will be used for printing. • The paper you loaded does not match with the reproduction ratio you selected. • The reproduction ratio selected by Auto Magnification mode is too big or too small. Set a paper size that matches the reproduction ratio you have selected and your original. You can make prints if you press the [Start] key. 176