Ricoh DD 6650P Operating Instructions - Page 184
Printing Problems
View all Ricoh DD 6650P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
7. Troubleshooting Printing Problems Problem Causes Solutions Misfeeds occur frequently. Improper paper type is selected. Select proper paper type. See page 77 "Printing on Thick Paper" , page 78 "Printing onto Envelopes" , or page 79 "Printing onto Special Paper". When you try to set several functions at a time, you cannot set some functions. Some functions cannot be used See page 215 "Function together. Compatibility". Parts of the image are not printed in Erase border mode. • Erase margin is too wide. • Edge margins of original are too narrow. Set a narrower erase margin with User Tools. For details, see page 102 "Erase Border". Prints are blank or parts of the image are not printed. The paper feed side plates are not set correctly. Make sure that the paper feed side plates touch the paper lightly and the proper paper size is displayed in the display. Prints are blank or parts of the image are not printed. The sensor is dirty. Use a soft cloth to clean the sensor, and then place the paper again. 2nd printing with another drum The 1st print image is still wet. is unsatisfactory. Wait until the 1st image becomes dry. An uneven solid image appears. Large solid image wrinkles the master. Increase the print speed or select photo mode. "Double feed detected at output. Check the output." is displayed frequently. The reverse or the face of Set to "Off" in "Double Feed printed paper is printed again. Warning" with User Tools. 182