Ricoh DD 6650P Operating Instructions - Page 28

1. Getting Started 7. [Check Modes] key Press this key to check settings. 8. [Program] key Press to register frequently used settings, or to recall registered settings. 9. [Clear Modes] key Press to clear previously entered print job settings. 10. [Hold Data-in] key Press to reject the online print temporarily. 11. [Master Making] mode select key Press to select the master making mode. 12. [Auto Cycle] key Press to make masters and prints in a single operation. See page 59 "Basic Procedure". 13. [Print] mode select key Press to select the print mode. 14. Main power indicator The main power indicator lights up when the main switch is turned on. 15. [Proof] key Press to make a proof print. Same as 22 16. Data In indicator (Green) • On: Data waiting for Master Making and printing is in the machine. • Blinking: Data is being received, or Master Making or printing is in progress. • Off: Master Making and printing are completed. 17. Error indicator (Red) • On: An error has occurred. Master Making and printing stops. • Off: Normal status 18. Speed setting keys Press to adjust the printing speed. See page 73 "Changing the Printing Speed". 19. [Initial position] key Press to reset to the default image position. 20. Number keys Press to enter the desired number of prints and data for selected modes. 21. [Clear/Stop] key • Clear Press to delete a number entered. • Stop Press to stop a job in progress. 26