Samsung CLP-650N User Manual (user Manual) (ver.1.03) (English) - Page 19
For Network Printing (CLP-650N only), Turning the Printer On, Printing a Demo
UPC - 635753721393
View all Samsung CLP-650N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
For Network Printing (CLP-650N only) You can attach your printer to a network using an Ethernet cable (UTP cable with RJ.45 connector). The CLP-650N has a built-in network interface card. Using an Ethernet Cable 1 Make sure that both the printer and the computer are turned off. 2 Plug one end of the Ethernet cable into the Ethernet network port on the left rear of the printer. Turning the Printer On 1 Plug the power cord into the power receptacle on the left rear of the printer. 2 Plug the other end into a properly grounded AC outlet and turn on the power. To the network LAN connection 3 Plug the other end of the cable into a network LAN connection. NOTE: After connecting the printer, you need to configure the network parameters on the control panel. See page 8.1. You can use the software supplied with the card. Refer to the Network Printer User's Guide. CAUTION: • Some parts inside of the printer may be hot when power is on, or after printing. Be careful not to burn yourself when working inside the printer. • Do not disassemble the printer when it is turned on or plugged in. Doing so may give you an electric shock. Printing a Demo Page Print a demo page to make sure that the printer is operating correctly. To print a demo page: In ready mode, press and hold the On Line/Continue button ( ) on the control panel for 2 seconds to print a demo page. A demo page showing the printer's features and capabilities is printed. 2.8 Setting Up Your Printer