Samsung CLP-650N User Manual (user Manual) (ver.1.03) (English) - Page 33

To load print material in the Multi-purpose Tray: 1 Lower the Multi-purpose Tray and unfold the paper support extension, as shown. 2 If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading. 3 Load the print material with the print side down. 4 Squeeze the paper width guide and slide it to the edge of the print material without causing it to bend. If you want to print on previously printed paper from the Multi-purpose Tray, the printed side should be facing up with the uncurled edge toward the printer. If you experience problems with the paper feeding, turn the paper around. NOTE: Make sure that you have not loaded too much print material. The print material buckles if you load a stack that is too deep or if you push it in too far. 5 When you print a document, set the paper source to Multi-Purpose Tray and select the appropriate paper size and type in the software application. For details, see the Software Section. NOTE: After printing, fold away the paper support extension and close the Multi-purpose Tray. Using the Manual Feed You can manually load a sheet of print material in the Multipurpose Tray if you select Manual Feed in the Source option from the Paper tab when you change print settings to print a document. For details about changing print settings, see the Software Section. Manually loading paper can be helpful when you want to check the print quality after each page is printed. This loading procedure is almost the same as the procedure for loading in the Multi-purpose Tray, except you load paper sheetby-sheet in the tray, send print data to print the first page, and press the On Line/Continue button ( ) on the control panel to print each following page. 1 Lower the Multi-purpose Tray and unfold the paper support extension, as shown. 2 Load a sheet of print material with the print side down. 4.3 Using Print Materials