Samsung CLP-650N User Manual (user Manual) (ver.1.03) (English) - Page 51
In the Multi-purpose Tray, improperly loaded, a lamp turns on at the corresponding
UPC - 635753721393
View all Samsung CLP-650N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3 Pull the tray open. After you pull it all the way out, lift up the front part of the tray slightly to release the tray from the printer. 4 Remove the jammed paper by gently pulling it straight out as shown below. 7 Close the access door firmly. The printer will resume printing. CAUTION: If the access door is not completely closed, the printer will not operate. In the Multi-purpose Tray When you print using the Multi-purpose Tray and the printer detects that there is either no paper or the paper has been improperly loaded, a lamp turns on at the corresponding location on the Status map. Also, "Jam0 In MP Tray" appears on the display. 1 If the paper is not feeding properly, using the handle, completely open the access door. 5 To replace the tray, lower the rear edge, align it with the slot, and slide it into the printer. 2 Remove the jammed paper by pulling in the direction shown. To avoid tearing the paper, pull it out gently and slowly. 6 After removing the jammed paper, check for paper which may be jammed in other parts of the printer. 7.5 Solving Problems