Sony DSC-RX100M4 Help Guide (Printable PDF) - Page 228
On cleaning
View all Sony DSC-RX100M4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
damaged. Do not insert a memory card that does not fit the memory card slot. Doing so will cause a malfunction. Do not use or store the memory card under the following conditions: High temperature locations such as in a car parked under the sun Locations exposed to direct sunlight Humid locations or locations with corrosive substances present To use a Memory Stick Micro media with this product, be sure to insert the Memory Stick Micro media into an M2 Adaptor as large as Duo size. If you insert a Memory Stick Micro media into the product without an M2 Adaptor as large as Duo size, you might not be able to remove it from the product. To use a microSD memory card with this product, be sure to insert the microSD memory card into a dedicated adaptor. When inserting a memory card into a memory card adaptor, be sure that the memory card is inserted in the correct direction and then insert it as far as it will go. If the card is not inserted properly, it may result in a malfunction. [257] How to Use Precautions/This product Cleaning this product On cleaning Cleaning the lens and flash Wipe the lens and flash with a soft cloth to remove fingerprints, dust, etc. Cleaning the lens Do not use a cleaning solution containing organic solvents, such as thinner, or benzine. When cleaning the lens surface, remove dust with a commercially available blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens cleaning solution directly onto the lens surface. Cleaning the flash Clean the flash surface before use. The heat of the flash emission may cause dirt on the flash surface to start smoking or burning. Wipe the flash surface with a soft cloth to remove dirt or dust, etc. Cleaning the product surface Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: