Sony DSC-RX100M4 Help Guide (Printable PDF) - Page 72
Notes on using the flash, Flash Mode
View all Sony DSC-RX100M4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
While charging the flash, flashes. After charging is completed, the flashing icon will light up. When shooting with the flash and the zoom is set to W, the shadow of the lens may appear on the screen, depending on the shooting conditions. If this happens, shoot away from the subject or set the zoom to T and shoot with the flash again. When the monitor is tilted upward more than 90 degrees, it is difficult to operate the (Flash pop-up) switch. Raise the flash unit before adjusting the monitor angle. When using flash to shoot pictures of yourself, be careful not to look directly at the light, because the flash will go off at a close distance. To prevent the flash from hitting the monitor when you press it back down into the camera body after use, first return the monitor to its original position. [47] How to Use Using shooting functions Using the flash Notes on using the flash When using the flash, note the following points. You cannot use the flash when recording movies. While charging the flash, the indicator flashes. When the charging of the flash is finished, the indicator lights up. [48] How to Use Using shooting functions Using the flash Flash Mode You can set the flash mode. 1. MENU → (Camera Settings) → [Flash Mode] → desired setting. You can also set the flash mode by pressing the (Flash Mode) on the control wheel. Menu item details Flash Off: The flash does not operate. Autoflash: The flash works in dark environments or when shooting towards bright light.