Home » TP-Link Manuals » Modems » TP-Link TD-W8950N » Manual Viewer

TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 16

Connecting the Modem Router

Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide  Note: Figure 2-1 Wall-mount Install The diameter of the screw, 3.5mm

Section	Page
Package Contents	9
Chapter 1. Product Overview	10
1.1 Overview of the Modem Router	10
1.2 Main Features	11
1.3 Panel Layout	12
1.3.1 The Front Panel	12
1.3.2 The Back Panel	13
Chapter 2. Connecting the Modem Router	15
2.1 System Requirements	15
2.2 Installation Environment Requirements	15
2.3 Connecting the Modem Router	16
Chapter 3. Quick Installation Guide	18
3.1 TCP/IP Configuration	18
3.2 Quick Installation Guide	19
Chapter 4. Configuring the Modem Router	23
4.1 Login	23
4.2 Device Info	23
4.3 Quick Setup	24
4.4 Advanced Setup	24
4.4.1 Layer2 Interface	25
4.4.1.1 ATM Interface	25
4.4.1.2 ETH Interface	27
4.4.2 WAN Service	28
4.4.2.1 ATM-EoA-PPPoE	28
4.4.2.2 ATM-EoA-IPoE	32
4.4.2.3 ATM-EoA-Bridging	35
4.4.2.4 ATM-PPPoA	35
4.4.2.5 ATM-IPoA	35
4.4.2.6 ETH-PPPoE	36
4.4.2.7 ETH-IPoE	36
4.4.2.8 ETH-Bridge	36
4.4.3 MAC Clone	36
4.4.4 LAN	37
4.4.4.1 IPv4 LAN Config	37
4.4.4.2 IPv6 LAN Config	39
4.4.5 NAT	40
4.4.5.1 Virtual Servers	41
4.4.5.2 Port Triggering	42
4.4.5.3 DMZ Host	44
4.4.5.4 ALG	44
4.4.6 Security	45
4.4.6.1 IP Filtering	45
4.4.6.2 MAC Filtering	46
4.4.7 Parental Control	48
4.4.7.1 Time Restriction	48
4.4.7.2 URL Filter	49
4.4.8 Quality of Service	50
4.4.8.1 Queue Config	51
4.4.8.2 QoS Classification	52
4.4.9 Bandwidth Control	53
4.4.9.1 Rules List	54
4.4.10 Routing	56
4.4.10.1 Default Gateway	56
4.4.10.2 Static Route	56
4.4.10.3 RIP	58
4.4.11 DNS	58
4.4.11.1 DNS Server	58
4.4.11.2 Dynamic DNS	59
4.4.12 DSL	60
4.4.13 UPnP	61
4.4.14 Interface Grouping	62
4.4.15 IP Tunnel	63
4.4.15.1 IPv6inIPv4	63
4.4.15.2 IPv4inIPv6	64
4.4.16 IPSec	65
4.4.17 Multicast	68
4.5 IPTV	69
4.6 Wireless	70
4.6.1 Basic	70
4.6.2 Security	71
4.6.2.1 WPS Setup	72
4.6.2.2 Manual Setup AP	78
4.6.3 Wireless Schedule	88
4.6.4 MAC Filter	89
4.6.5 Wireless Bridge	90
4.6.6 Advanced	91
4.6.7 Station info	93
4.7 Guest Network	93
4.7.1 Basic	94
4.7.2 Station list	95
4.8 Diagnostics	95
4.9 Management	95
4.9.1 Settings	96
4.9.1.1 Export	96
4.9.1.2 Import	97
4.9.1.3 Restore Default	98
4.9.2 System Log	99
4.9.3 SNMP Agent	100
4.9.4 TR-069 client	101
4.9.5 Internet Time	102
4.9.6 Access Control	103
4.9.6.1 Passwords	103
4.9.6.2 Remote Access	104
4.9.7 Update Firmware	105
4.9.8 Reboot	106
4.10 Logout	106
Appendix A: Specifications	108
Appendix B: Configuring the PC	109
Appendix C: Troubleshooting	113

Match case Limit results 1 per page

TD-W8950N

150Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 2-1 Wall-mount Install



Note:

The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The

screw that project from the wall need around 4mm based, and the length of the screw need to be

at least 20mm to withstand the weight of the product.

2.3 Connecting the Modem Router

Before installing the device, please make sure your broadband service provided by your ISP is

available. If there is any problem, please contact your ISP. Before cable connection, cut off the

power supply and keep your hands dry. You can follow the steps below to install it.

Step 1:

Connect the ADSL Line.

Method one:

Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear

panel TD-W8950N, and insert the other end into the wall socket.

Method two

：

You can use a separate splitter. External splitter can divide the data and

voice, and then you can access the Internet and make calls at the same time. The

external splitter has three ports: