TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 26

TD-W8950N, Remove, DSL Link Type, PPPoA, Encapsulation Mode, Service Category, UBR Without PCR

Get TP-Link TD-W8950N PDF manuals and user guides View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-2  Remove: Select the check box in the table on the screen above and then click the Remove button, the corresponding interface will be deleted in the table.  Note: If the interface is used by the configuration of the 4.4.2 WAN Service, you need to remove the corresponding WAN Service entry first before you can remove it here.  Add: Click the button, and you can add a new interface in the next screen. Figure 4-3  VPI/VCI: the VPI and VCI values provided by your ISP. Do not change them unless it was required by your ISP.  DSL Link Type: Select a DSL Link Type which is provided by your ISP. The options include EoA (it is for PPPoE, IPoE, and Bridge), PPPoA (PPP over ATM) and IPoA (IP over ATM).  Encapsulation Mode: The mode of the data processing over the Link Type you have selected. Uses the default setting, if you are not sure.  Service Category: Select the type of the service assigned by your ISP in the drop-down list. The default type is UBR Without PCR.  Note: Enabling packet level QoS for PVC improves performance for selected classes of applications. While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides this, it cannot be set for the connection type of CBR and Real-time VBR. If you select the QoS 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
TD-W8950N
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-2
Remove
: Select the check box in the table on the screen above and then click the
Remove
button, the corresponding interface will be deleted in the table.
Note:
If the interface is used by the configuration of the
4.4.2
WAN Service
, you need to remove the
corresponding WAN Service entry first before you can remove it here.
Add
: Click the button, and you can add a new interface in the next screen.
Figure 4-3
VPI
/
VCI
: the VPI and VCI values provided by your ISP. Do not change them unless it was
required by your ISP.
DSL Link Type
: Select a DSL Link Type which is provided by your ISP. The options include
EoA
(it
is for PPPoE, IPoE, and Bridge),
PPPoA
(PPP over ATM) and
IPoA
(IP over ATM).
Encapsulation Mode
: The mode of the data processing over the Link Type you have
selected. Uses the default setting, if you are not sure.
Service Category
: Select the type of the service assigned by your ISP in the drop-down list.
The default type is
UBR Without PCR
.
Note:
Enabling packet level QoS for PVC improves performance for selected classes of applications.
While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides
this, it cannot be set for the connection type of CBR and Real-time VBR. If you select the QoS
18