TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 55
TD-W8950N, Rule Status, IP Range, Port Range, Protocol, Priority, Upstream, Downstream, Save/Apply,
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-47 Rule Status: Select the status of the rule from the drop-down list to enable or disable the rule. IP Range: Enter a single IP address or a range of IP addresses. Port Range: Enter a single port or a range of ports. Protocol: Select a protocol type from the drop-down list. TCP, UDP and ALL are available here. Priority: Select priority form the drop-down list. There are five options: Highest, 1, 2, 3, 4, 5, 6 and Lowest. The default precedence of the rule is 4. Upstream: Enter the min and max upload speed through the WAN port. Downstream: Enter the min and max download speed through the WAN port. After completing the above configuration, click the Save/Apply button to make it take effect and then you will see the following list as shown in Figure 4-48. If you want to modify the rule, click the Edit button. If you want to delete the rule, check the Remove box first and then click the Remove button. Figure 4-48 47