TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 94
Basic
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.7.1 Basic Choose menu "Guest Network""Basic", and you will see the screen as shown in Figure 4-100. This feature allows you to create a separate network for your guests without allowing them to access your main network and the computers connected to it. Figure 4-100 You can enable or disable Guest Network. When you enable this function, you could set wireless parameters for Guest Network. Guest SSID: The guest network name. When setting up a Guest network, it is strongly recommended to use a name that easily distinguishes it from your primary network. Authentication Type: Select the Authentication Type from the drop-down list. Encryption: You can select either Auto, or AES+TKIP. Wireless Password: Here display the default wireless password, you can click Click here to display to see the default wireless password, and you can also enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters to create a new password. Group Key Update Period: Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. Allow Guests to access my Local Network: The guests have access to your Local Network, but can not login the modem router's web management interface. Guest Network Isolation: This function can isolate wireless clients on your guest network from each other. Client isolation is disabled by default. Guest Network Bandwidth Control: With this function, you can configure the Upstream Bandwidth and Downstream Bandwidth for guest network. Click Save/Apply to save your settings. 86