TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 37
TD-W8950N, Clone, Restore Default, Advanced Setup, IPv4 LAN Config and IPv6 LAN, Config, 4.4.1 IPv4
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide You can select corresponding WAN Interface from the drop-down list and click Clone button to clone your current PC MAC. Click Restore Default button to restore the WAN Interface's default MAC Address. Note: Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with each other. 4.4.4 LAN Choose "Advanced Setup""LAN", it includes two menus: IPv4 LAN Config and IPv6 LAN Config. The detailed descriptions are provided below. 4.4.4.1 IPv4 LAN Config Choose "Advanced Setup""LAN" "IPv4 LAN Config", and you will see the LAN screen (shown in Figure 4-21), the section allows you to configure the router's LAN ports settings. Figure 4-21 IP Address: You can configure the router's IP Address and Subnet Mask for LAN Interface. IP Address: Enter the router's local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1. 29