TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 72
TD-W8950N, 6.2.1 WPS Setup, I. By PBC, Push-Button, Method One
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.2.1 WPS Setup This section will guide you to add a new wireless device to an existing network quickly by WPS (or called QSS) method. Note: 1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK mode is configured. 2) To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. By PBC If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods. Click Push-Button, you will see the screen as shown below. Figure 4-71 Method One: Hardware push button. Step 1: Press the WPS button on the back panel of the router. 64