TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 44
Open Port End
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide 3. Enter the Trigger Port Start, Trigger Port End, Open Port Start and Open Port End in the table, and then select the Trigger protocol and Open protocol, TCP, UDP or All. 4. Click Save/Apply to enable the settings and then you will see your settings as shown in Figure 4-27. Note: If you select the application from the drop-down list, the External Port Start, External Port End, Internal Port Start, Internal Port End and the Protocol will be added in the table automatically. 4.4.5.3 DMZ Host Choose "Advanced Setup""NAT""DMZ Host", you can set up DMZ Host on the screen (shown in Figure 4-29). The DMZ host feature can make a local host be exposed to the Internet for a special-purpose service, such as online gaming or video conferencing. Figure 4-29 To add a new DMZ Host: You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you set on this page. Note: DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may change while using the DHCP function. 4.4.5.4 ALG Choose "Advanced Setup""NAT""ALG", and then you can configure the basic security in the screen as shown in Figure 4-29. 36