TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 42
TD-W8950N, Server IP Address, Save/Apply, 4.5.2 Port Triggering, Advanced Setup, Port Triggering
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Virtual Server in the next screen as shown in Figure 4-26. Figure 4-26 2. Select the Interface which you want to use from the drop-down list. 3. Select the service which you want to use from the drop-down list. If the list does not have the service you need, type the name of the custom service in the text box. 4. Type the IP Address of the computer in the Server IP Address text box. 5. Enter the External Port Start, External Port End, Internal Port Start and Internal Port End in the table, and then select the protocol used for this Virtual Server, TCP, UDP or All. 6. Click Save/Apply to enable virtual server and then you will see your setting as shown in Figure 4-25. Note: If you select the service from the drop-down list, the External Port Start, External Port End, Internal Port Start, Internal Port End and the Protocol will be added in the table automatically. You only need to enter the Server IP Address for the Virtual Server. 4.4.5.2 Port Triggering Choose "Advanced Setup""NAT""Port Triggering", you can set Port Triggering on the screen (shown in Figure 4-27). Some applications require that specific ports in the router's firewall should be opened for access by remote devices. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote device using the triggering ports. The router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the open ports. A maximum 32 entries can be configured. 34