TP-Link TD-W8950N TD-W8950N V1 User Guide 1910010940 - Page 57
Destination IP Address/prefix length
View all TP-Link TD-W8950N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-50 To add static routing entries: 1. Click the Add button in Figure 4-50, and you will see the screen as shown in Figure 4-51. 2. Enter the following data: Figure 4-51 IP Version: Select the version of IP. Destination IP Address/prefix length: The Destination IP Address is the address of the network or host that you want to assign to a static route. Interface: Select the Interface name in the text box, or else, the default Use Interface will be adopted for the Static Route. Gateway IP Address: If you select the IPoE or IPoA mode for Interface, the screen above will display this item, you should type the Gateway address correctly, and the other option for Interface will adopt the default Gateway address for the Static Route. 3. Click Save/Apply to and then you will see you settings as shown in Figure 4-50. To remove a static routing entry: 1. Select the Remove check box according to the entry in the Figure 4-50. 2. Click the Remove button, and the entry will be deleted. Note: Gateway IP address should be correctly configured if IP based Interface (IPoE, IPoA) is selected. 49