TRENDnet TEW-827DRU Users Guide - Page 40
IPv6 Settings, Advanced, Setup, Apply/Discard Changes, Apply & Reboot.
View all TRENDnet TEW-827DRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
TRENDnet User's Guide IPv6 Settings Advanced > Setup > IPv6 Settings IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the number of available Internet public IP addresses due to the 128-bit IP address structure versus IPv4 32-bit address structure. In addition, there are several integrated enhancements compared to the most commonly used and well known IPv4 (Internet Protocol Version 4) such as: Integrated IPsec - Better Security Integrated Quality of Service (QoS) - Lower latency for real-time applications Higher Efficiency of Routing - Less transmission overhead and smaller routing tables Easier configuration of addressing Note: In order to use IPv6 Internet connection settings, it is required that your ISP provide you with the IPv6 service. Please contact your ISP for availability and more information about the IPv6 service. 1. Log into your router management page (see "Access your router management page" on page 10). 2. Click on Advanced and click on Setup, then click on IPv6 Settings. . TEW-827DRU 3. Review the IPv6 Internet Connection settings and enter information settings specified by your ISP. To save changes to this section, click Save when finished. Commit your changes to the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply & Reboot. Note: Please contact your ISP for IPv6 service availability. Select the IPv6 connection type provided by your ISP. Static IPv6 Auto-configuration (SLAAC/DHCPv6) PPPoE 6to4 Link-Local Only © Copyright 2016 TRENDnet. All Rights Reserved. 37