Texas Instruments TI-73VSC Guidebook - Page 266

260 Chapter 13: Link and the CBLàCBR Application • When you select 1:Rename, the Name= prompt is displayed, and you can enter another appropriate variable name using the - } menu (for example, renaming Pic1 to Pic2 where Pic2 is undefined), or you can enter text using the Text editor (- t) (for example, renaming L1 to ¨ABC where ¨ABC is undefined). When renaming lists, do not enter the ¨ (- v OPS 9). The calculator assumes that it is a list name. Press b to resume transmission. Note: You cannot rename software applications or constants (the 1:Rename option is excluded from the DuplicateName menu). • When you select 2:Overwrite, the sending unit's data overwrites the existing data stored on the receiving unit. Transmission resumes. • When you select 3:Omit, the sending unit does not send the data in the duplicated variable name. Transmission resumes with the next item. • When you select 4:Quit, transmission stops, and the receiving unit exits receive mode. Transmission Error Conditions A transmission error (Error in Xmit) occurs after one or two seconds if: • The unit-to-unit cable is not attached to the sending or receiving unit. Note: If the cable is attached, push it in firmly and try again. • The receiving unit is not set to receive transmission. • You attempt a backup between a TIN73 and a TIN82 or TIN83. • You attempt a data transfer from a TIN73 to a TIN82 with data other than numerical lists, L1-L6, or without using menu item 9:Vars to TI82.