Xerox 7300B Study Guide - Page 12

Select a Location for the Printer Select a location for the printer that is level and provides clearance for ventilation. To avoid print quality problems, choose a location that is protected from direct sunlight. Refer to the General Information section of the Phaser 7300 Color Printer Service Manual for information on physical specifications as well as clearance specifications. ■ 24 inches (60 cm) on the right and left sides ■ 8 inches (20 cm) at the rear ■ 28 inches (70 cm) on top of the printer ■ 40 inches (100 cm) in front of the printer Unpack and Install the 1650 Sheet High-Capacity Feeder In this exercise, you will unpack and install the 1650 Sheet High-Capacity Feeder. Refer to the instruction sheet that ships with the 1650 Sheet High-Capacity Feeder to complete this exercise. The 1650 Sheet High-Capacity Feeder instruction sheet is available on the Phaser 7300 Customer Support Training CD-ROM under the Resources tab. The 1650 Sheet High-Capacity Feeder weighs 150 lbs. (68.5 kg.) and requires three people for lifting. To avoid injury, always use good lifting techniques when moving the printer. Refer to the Setup Poster, step 2 for the proper lift points and illustration of the lifting technique. Unpack and install the 1650 Sheet High-Capacity Feeder. page 8 PHASER 7300 SETUP WORKSHEET version 1.0