Xerox 7300B Study Guide - Page 34

There are labels for clearing jams located under the top cover (A) and behind the front cover (B). The following diagram provides the paper path locations for each of the alpha-numeric jam codes. Stack Full Sensor E12 Paper Ejection Fuser Exit Sensor A10 A Registration Exit Sensor A Registration Entrance Sensor Paper Transfer A22 Paper Feed A11 A6 Multi-Purpose Tray (MPT) A7 Duplex-in Sensor B13 Duplex Input Duplex Entry B21 B8 Duplex Exit Sensor Duplex Input Sensor Tray 1 Tray 2 Duplex Rear Sensor Tray 3 Tray 4 Tray 5 Misfeed from MPT B Registration Entrance Sensor Misfeed from Duplex Unit Misfeed from Tray 1 E1 Misfeed from Tray 2 E2 Misfeed from Tray 3 E3 Misfeed from Tray 4 E4 Misfeed from Tray 5 E5 The Front Panel error messages for some jams can be misleading and confusing. Though there are numerous Error Codes, jams are reported in only three categories: (1) Jam Inside Top Cover, (2) Jam Inside Duplex Unit, and (3) Jam Inside Right Door. For each jam indicated, clear them as follows: 1. For Jam Inside Top Cover error messages: ■ Open right door A and check for paper or scraps in the B registration rollers ■ Open the Top Cover and check for paper or scraps in the Fuser, the Duplex Gate Assembly, or in the A registration rollers at the front of the Transfer Unit 2. For Jam Inside Right Door A error messages: ■ Open the right door and remove any paper or scraps ■ Open the Top Cover and check for paper or scraps in the A Registration Rollers or Transfer Unit 3. For Jam Inside Duplex Unit: ■ Open the duplex unit and remove any paper or scraps, especially the left side page 30 PHASER 7300 CARE WORKSHEET 0