Xerox F110 User Manual - Page 45

Chapter Appendix received fax. A memory buffer guarantees that exact data is issued even after a power loss. In this way, you can verify exactly when a fax has reached you. Tone Dialing (also Dual Tone MultiFrequency): In many countries, tone dialing has replaced pulse dialing, in which each number was sent as a corresponding number of pulses. With tone dialing, a specific tone is assigned to each key (referred to as DTMF tones). Toner Level Memory: Update the toner level memory of your machine with the Plug'n'Print card that is included with each new print cartridge. Your machine registers the extent of toner used for every print-out and calculates the toner level of the print cartridge on that basis. e indicated toner level is only meaningful if you update each new print cartridge with the Plug'n'Print card that is provided with the cartridge. Transfer Speed: CCITT/ITU has published international standards for the transmission of data over telephone lines. All short names begin with V, so these are also referred to as V standards. e most important transmission speeds for fax transmissions are: V.17-7,200 to 14,400 bps V.21-maximum 300 bps V.22-maximum 1,200 bps V.22 bis-maximum 2,400 bps V.27 ter-maximum 4,800 bps V.29-maximum 9,600 bps V.32 bis-maximum 14,400 bps V.34-maximum 33,600 bps Warm-Up Phase: Normally, the machine is in the energy saving mode (see Energy Saving Mode). In the warm-up phase, the machine heats up the printing unit until it has reached the necessary operating temperature, after which the copy or fax can be printed out. 45 Appendix English