Yamaha DTX502 Owner's Manual - Page 62
Reverb Type, Reverb Return, Pad Control, Snare Adjustment, Tempo, >Ki, type=hall1, l=snares
View all Yamaha DTX502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Advanced Techniques Setting Parameters using Menu Mode KitC3 Reverb Type >KitC3 "ReVtype=hall1 , q q RevType Use this parameter to select the type of reverb to be applied. Settings none, hall1, hall2, hall3, room1, room2, room3, stage1, stage2, plate KitC4 Reverb Return >KitC4 "ReVMastRet= 64, q q RevMastRet Use this parameter to set the reverb unit's return level. Settings 0 to 127 NOTE The reverb return level can be adjusted to balance the volumes of the sounds with reverb applied and those without. KitC5 Pad Control >KitC5 "PacCtl=snares , q q PadCtl When a pad unit equipped with a pad controller is connected to the [qSNARE] jack, this parameter can be used to select a function for the controller. Settings off snares tuning tempo Description Pad controller performs no function. Adjustment of snare-wire tension (also affecting open-rim sounds) Adjustment of tuning (also affecting open-rim sounds) Adjustment of the tempo KitC6 Snare Adjustment >KitC6 " Snares= 4 , q q Snares Use this parameter to adjust the snare-wire tension for the pad connected to the [qSNARE] jack. An "off" setting simulates the snare wires being fully removed from the head. Settings off 1 to 24 Description Snare wires fully removed Higher values correspond to tighter snare wires and vice-versa. KitC7 Tempo >KitC7 " tempo=off , q q Tempo Use this parameter to specify the tempo to be set automatically upon selection of the current drum kit. When set to "off", the tempo will not change automatically when the current kit is selected. Settings off, 30 to 300 62 DTX502 Owner's Manual