Yamaha DTX502 Owner's Manual - Page 75
Auto Power-Off, Restore, Factory Set, >Sys, oPwrOff=30, em9 Res, Are you sure?, ory Se, Execu - factory reset
View all Yamaha DTX502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Advanced Techniques Setting Parameters using Menu Mode System8 Auto Power-Off >System8 " AutoPwrOff=30 , q q AutoPwrOff Use this parameter to set the time until the Auto Power-Off function activates (page 13) or to disable ("off") this function. Settings off, 5, 10, 15, 30, 60, and 120 (min) NOTE • Settings for the Auto Power-Off function do not represent exact times and there may be some variation. • The drum module automatically stores its system settings before turning off automatically. System10 Factory Set >System: " Factory Set Using the procedure described below, you can return all User data (i.e., kits, click sets, trigger setups, and songs) to the default settings. CAUTION When you reset parameters as described below, any changes you have made to them will be lost. Before proceeding, therefore, you should ensure that they contain no irreplaceable settings. 1. Press the [SAVE/ENTER] button on the Factory Set page. You will be asked to confirm that you wish to proceed. System9 Restore >System9 " Restore , Using the Restore function as described below, you can return all User data (i.e., kits, click sets, trigger setups, and songs) to the settings they had when you last turned on the drum module. CAUTION When you reset parameters using the Restore function, any changes you have made to them since last turning on the drum module will be lost. Before proceeding, therefore, you should ensure that these parameters contain no irreplaceable settings. 1. Press the [SAVE/ENTER] button on the Restore page. You will be asked to confirm that you wish to proceed. >System9 Restore Are you sure? To cancel the Restore process, press the [ ] button. 2. Press the [SAVE/ENTER] button to reset the parameters. 3. When the parameters have been successfully reset, the mes- sage "Completed." will be displayed. 4. The drum module will automatically restart. >System: FactSet Are you sure? To cancel the process without restoring default settings, press the [ ] button. 2. Press the [SAVE/ENTER] button to reset the parameters. >System: FactSet Executing... 3. When the parameters have been successfully reset, the mes- sage "Completed." will be displayed. NOTE You can also restore the Factory Set by turning on the drum module with both the [] buttons held down (page 14) 4. When the Factory Set has been restored, the drum module will automatically restart and the Initial Setup page will be displayed (page 13). DTX502 Owner's Manual 75