Yamaha DTX502 Owner's Manual - Page 65

Advanced Techniques Setting Parameters using Menu Mode KitJ2 Clear User Kit >KitJ2 Clear "51:User Kit On the Clear User Kit page, you can restore a User kit to its default settings. 1. Navigate to the Clear User Kit page and specify which of the User kits (numbered 51 to 100) is to be cleared. >KitJ2 Clear "51:User Kit User kit number 2. Press the [SAVE/ENTER] button. You will be asked to confirm that you wish to clear the User kit. >KitJ2 Clear Are you sure? CAUTION When a User kit is cleared, all of its settings will be returned to their default conditions. Before proceeding, therefore, you should ensure that the User kit in question contains no irreplaceable settings. Press the [SAVE/ENTER] button once again to clear the User kit. To cancel the process without clearing any settings, press the [ ] button. 3. When the User kit has been successfully cleared, the mes- sage "Completed." will be displayed. 05: Pad Area Pad-related settings Pad1 Hi-hat Splash Sensitivity >Pad1 " Splash= 30 , q q Splash Use this parameter to set the degree of sensitivity for detecting hi-hat foot splashes. The higher the value, the easier it will be to produce a foot-splash sound with the hi-hat controller. High values may, however, result in splash sounds being unintentionally produced when, for example, you operate the hi-hat controller lightly as you keep time. It is a good idea to set this parameter to "off" if you do not want to play foot splashes. Settings off, 1 to 127 Pad2 Foot Close Position >Pad2 " ClosePos=28 , q q ClosePos Use this parameter to adjust the position at which the hi-hat switches from open to closed when the hi-hat controller is depressed. The lower the value, the smaller the virtual opening between the top and bottom hi-hats. Settings 0 to 32 DTX502 Owner's Manual 65