Yamaha DTX700 Reference Manual - Page 15
For settings affecting entire kits - drum kit
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
KIT : The current kit number is reduced by 1. : The current kit number is increased by 1. : The current kit number is locked. NOTE • If you hold down the [SHIFT] button and press the [F1] or [F2] button, the current kit number will be reduced or increased in units of 10. • See page 14 for details regarding cursor operations on Menu area pages. For settings affecting entire kits List of Functions KIT/COMMON Common Volume Tempo TrgSetupLink Name Icon KIT/COMMON Tempo Use this parameter to specify the tempo to be set automatically upon selection of the current drum kit. An "off" setting means that the tempo will not change automatically when the current kit is selected - in other words, the tempo of the previously selected kit is maintained. Settings: off, 30 to 300 NOTE • If waves are assigned to any of the kit's pads, the tempo (or speed) at which they are played will not be affected by the kit's tempo setting. Trigger Setup Link (TrgSetupLink) Use this parameter to specify the trigger setup to be used when the current kit is selected. A trigger setup can be assigned to each different drum kit. Select "off" if the currently selected drum kit does not need a special trigger setup. Settings: off, 1 to 20 Name Use this parameter to set a name for the currently-selected kit. A name of up to 12 characters in length can be assigned to drum kits. Setting a Kit Name 1. Press the dial to call up the kit naming page. 2. Move the cursor within the name field using the [F1] and [F3] buttons and select a character for that position by turning the dial or pressing the [-/DEC] and [+/INC] buttons. The following characters can be used. Volume Use this parameter to set the volume of the entire kit. Settings: 0 to 127 NOTE • If you change the Volume parameter setting for MIDI channel 10 on the Menu area's Kit/MIDI/Other page, the Volume parameter on this page will be automatically set to the same value. The reverse does not apply, however - in other words, the Volume parameter for MIDI channel 10 from the Menu area's Kit/MIDI/Other page is not affected by changes made on this page. NOTE • If you hold down the [SHIFT] button and press the [F1] or [F3] button, the cursor will move to the start or end of the kit name field. • If you hold down the [SHIFT] button and press the [-/ DEC] or [+/INC] button, or alternatively, hold down the [SHIFT] button and turn the dial, the cursor will jump between the " ", "0", "A", "a", and "~" characters. 3. When you have entered the required name, press the dial or the [EXIT] button to return to the previous page. 4. Press the [STORE] button and the dial to store your new setting. DTX700 Reference Manual 15