Yamaha DTX700 Reference Manual - Page 20
For MIDI-related settings
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
KIT Alternate Group (AltGroup) Use this parameter to assign voices to alternate groups (i.e., monophonic sets of pads, only one of which can be producing a sound at any time). If you do not want various individual voices to be played together, they should be assigned to the same alternate group. Whenever voices from the same alternate group are triggered by playing the pads, the latter voice is given priority and the earlier one is silenced. Set this parameter to "off" if you do not want to assign to an alternate group. Settings: off, hhOpen, hhClose, 1 to 124 NOTE • The "hhOpen" and "hhClose" alternate groups operate in a special way: If a voice from the "hhClose" group is triggered after a voice from the "hhOpen" group, the hhOpen voice is silenced and only the hhClose voice is played. No silencing of the earlier sound is performed for any other triggering sequence (for example, hhOpen followed by hhOpen; hhClose followed by hhOpen; or hhClose followed by hhClose). SliderSelect Use this parameter to select the slider for controlling the volume of the current pad's voices. Settings: kick, snare, tom, cymbal, hihat, no asg (selected when no assignment is required) For MIDI-related settings List of Functions MIDI Assign MessageType Mode Note MIDI Ch GateTime RcvKeyOff TrgLink MaskTime VelLimitLo VelLimitHi VelCrossFade TrgVel TrgMonoPoly TrgAltGrp TG MIDI Sw TG Switch MIDI Switch Other Transmit Volume Pan MSB LSB PC VarSend(Dry) ChoSend RevSend CC No CC Val KIT/MIDI/ASSIGN 1/5 KIT/MIDI DTX700 Reference Manual MessageType Use this parameter to set the type of MIDI message that will be sent whenever the current pad is struck. note CC PC start continue stop A MIDI note will be sent. Use this setting if you wish to produce a sound by striking the pad. A Control Change message will be sent. A Program Change message will be sent. A sysex Start command (hexadecimal FA) will be sent. A sysex Continue command (hexadecimal FB) will be sent. A sysex Stop command (hexadecimal FC) will be sent. 20