Yamaha DTX700 Reference Manual - Page 60

FILE When loading a trigger: Settings: 01 to 20 7. When you have finished making your selections, press the [F3] button. You will be asked to confirm that the file is to be loaded. FILE/RENAME Carry out the following steps to rename a file saved on a USB memory device.  Procedure 1. Plug the USB memory device containing the file to be renamed into the [USB TO DEVICE] port on the side panel. 2. Navigate to the Menu area's File/Rename page. The page will appear as follows. 8. Press the dial to begin loading. The following message will be displayed as the data is being loaded. CAUTION • Do not unplug the USB memory device from the [USB TO DEVICE] port or turn off either the memory device or the DTX700 while data is being loaded. Failure to observe this precaution can lead to the memory device or the DTX700 being permanently damaged. When the data has been loaded, you will be returned to the page from Step 5 or 6 accordingly. 3. Use the Type parameter to select the type of file to be renamed. 3-1 Turn the dial to move the cursor to the Type row, and then press the dial. 3-2 Turn the dial to select the type of file to be renamed. All AllKit AllWave AllSong AllTrigger Utility All User data - i.e., all User kits, User waves, User songs, and User triggers in addition to utility data All User kit data All wave data All User song data All User-trigger data Utility data Settings: All, AllKit, AllWave, AllSong, AllTrigger, Utility 3-3 When you have made your selection, press the dial once again. 4. Select the file to be renamed. 4-1 Turn the dial to move the cursor to the File row, and then press the dial. 4-2 Turn the dial to select the file to be renamed. 4-3 When you have made your selection, press the dial once again. DTX700 Reference Manual 60